Step 1

Rotate stamping block so it’s positioned in a diamond shape. Place bracelet blank horizontally on the block.

Note: Having stamping block in a diamond shape will make it easier to find the center of the bracelet blank because it better fits the length of your bracelet.

Step 2

Adhere bracelet stamp guide in the center of the bracelet blank by matching up the main orange guide mark with the top and bottom point of your stamping block.

For 1/4” bracelets, make sure the top thin, blue horizontal line that runs through the guide marks matches up with the bottom edge of the bracelet blank.

For 3/8” bracelets, match up the middle, blue side mark on the guide with the bottom edge of the bracelet blank.

For 5/8” bracelets, match up the bottom, blue side mark on the guide with the bottom edge of the bracelet blank.

Step 3

Hold stamp on bracelet blank. Lightly drag stamp towards the guide until the stamp catches the edge of the guide.

Tip: Slightly tilt the stamp towards you while dragging the stamp towards the guide. Hold the stamp flat and firmly in place before striking the stamp.

Step 4

Anchor side of hand on workspace, and then strike the stamp once with medium force using metal stamping hammer. Repeat to complete desired word.

Note: For lowercase letters g, j, p, q, y: Place bottom of the stamp on the thin horizontal blue line that runs through the guide marks.